dfmea-design
Build a design risk analysis, DFMEA worksheet, or interface analysis using the AIAG-VDA FMEA Handbook 2019. Covers design intent, interface failures, boundary diagram, and design robustness before manufacturing. Use during new product development, design changes, or when a field failure reveals a design weakness. Required for IATF 16949 §8.3 scope.
- License 许可
- MIT
- 最近更新
- 2026-11-14
- Stars
- ★ 1.6k
- Forks
- 491
01 前言 Front Matter
- name
- dfmea-design
- license
- MIT
- metadata
- { "author": "RBraga01", "domain": "quality-engineering", "status": "approved", "created": "2026-06-01", "version": "1.1", "iso-9001": "8.3", "subdomain": "risk-analysis", "iatf-16949": "8.3.3.3", "industries": "automotive,electronics,aerospace,medical,general", "updated_by": "RBraga01", "reviewed_by": "RBraga01", "last_updated": "2026-06-06", "aiag-reference": "AIAG-VDA FMEA Handbook 2019, DFMEA chapters", "standard_edition": "AIAG-VDA FMEA Handbook 2019" }
- description
- Build a design risk analysis, DFMEA worksheet, or interface analysis using the AIAG-VDA FMEA Handbook 2019. Covers design intent, interface failures, boundary diagram, and design robustness before manufacturing. Use during new product development, design changes, or when a field failure reveals a design weakness. Required for IATF 16949 §8.3 scope.
02 资源文件 1
- 参考文档references/interface-matrix.md10.4 KB
03 SKILL.md 正文
Design FMEA (DFMEA) — AIAG-VDA 2019
Goal
Identify and mitigate design risks by analysing functions, interfaces, and failure modes — so that design weaknesses are resolved before release to manufacturing, and the results feed directly into the DVP, PFMEA, and Control Plan.
Required Execution Checklist
- [ ] DFMEA scope defined: boundary diagram complete, inside/outside boundary identified
- [ ] Product hierarchy mapped: system → subsystem → component → interface (Step 2)
- [ ] All interfaces identified — internal (component-to-component), external (environment), and user/assembly
- [ ] All functions defined with Verb + Noun + Measurable Standard (Step 3)
- [ ] Each function has a measurable verification method confirmed in the DVP
- [ ] Failure chain complete: Effect → Mode → Cause for each function (Step 4)
- [ ] All Failure Causes validated using engineering analysis (FEA, calculation) or test evidence — not assumptions
- [ ] S/O/D ratings justified using analysis, test data, or design history
- [ ] All H-AP items have a defined action, named owner, and target date
- [ ] DFMEA → DVP, PFMEA, and drawing linkage verified before release to manufacturing
When to use
- New product development (integrate into APQP Phase 2 — Product Design and Development)
- Design change or engineering change request (ECR)
- Field failure investigation revealing a design root cause
- Periodic design review
- Before handoff to manufacturing (DFMEA drives the PFMEA)
Key difference from PFMEA: DFMEA analyses the design intent and design robustness. PFMEA analyses the manufacturing process. DFMEA comes first — its failure effects and severity ratings inform the PFMEA.
Prerequisites
- Product requirements / specification (engineering drawing, customer spec)
- System block diagram or product breakdown structure
- Interface matrix (if system-level analysis)
- Team: design engineer, systems engineer, quality engineer, reliability (if available)
The 7-Step AIAG-VDA 2019 Approach for DFMEA
Step 1 — Planning and Preparation
Define scope:
- Analysis object: component, subsystem, or system
- Customer: who is the next-level assembly? Who is the end user?
- Boundary diagram: what is inside and outside the DFMEA scope
- Interface matrix: what interacts with this component (mechanical, electrical, thermal, chemical)?
Step 2 — Structure Analysis (Design Hierarchy)
Map the product hierarchy:
System (e.g., Steering Column)
└── Subsystem (e.g., Tilt Mechanism)
└── Component (e.g., Pivot Pin)
└── Interface (e.g., Pin-to-Bracket contact)
Interface matrix: For each component, identify:
- Interfaces to other components (internal)
- Interfaces to the environment (external): heat, vibration, corrosion, electromagnetic
- Interfaces to the user or assembly process
Interfaces are where most design failures occur. Each interface must be analysed as a potential failure location in its own right — not just the components that share it. In practice, at least 50% of DFMEA effort should focus on interfaces and interactions; component-only analysis misses the most common field failure modes.
Step 3 — Function Analysis
For each element in the structure, define its design function:
Format: Verb + Noun + Measurable Standard
Examples:
- Component function: "Transmit torque of 50 Nm ± 5 Nm without permanent deformation"
- Interface function: "Maintain sealing at pressure 2.5 bar across -40°C to +120°C"
- System function: "Provide steering angle feedback with latency < 50ms"
Identify Special Characteristics from the drawing — these get S = 9 or 10 in Step 5.
Testability rule: Every function must be measurable and verifiable — a test or analysis method must exist in the DVP. A function with no verification method cannot receive a credible D rating in Step 5.
Step 4 — Failure Analysis
The failure chain for DFMEA: Failure Effect → Failure Mode → Failure Cause
Failure Effect (FE):
- End-user effect: safety hazard, loss of primary function, reduced performance
- Vehicle/system effect: damage to adjacent components, secondary failures
- Manufacturing effect (if component is not to spec): inability to assemble, rework
Failure Mode (FM): How does this component fail to perform its design function?
- Fracture, wear, corrosion, deformation, signal loss, leakage, dimensional drift, electrical short/open
Failure Cause (FC): What design parameter or design decision causes the failure mode?
- Insufficient material strength (wrong grade, wrong heat treat)
- Inadequate geometry (stress concentration, insufficient wall thickness)
- Thermal expansion mismatch
- Corrosion protection insufficient for environment
- Tolerance stack-up causing interference
- Interface design not accounting for assembly variation
Failure Cause validation: Failure Causes must be validated using engineering analysis (FEA, structural calculation, thermal simulation) or test evidence. Unverified assumptions — "probably," "likely," "may be" — are not acceptable as final Failure Causes. Use CAE (FEA, simulation), test data, and field return data to support both the failure modes identified and their causes. For post-field-failure DFMEA updates, the FC must match the validated root cause from the 8D or field investigation.
Step 5 — Risk Analysis
Use the same S/O/D ratings and AP table as PFMEA (see action-priority-ap and pfmea-process for the tables).
Key DFMEA-specific notes:
Occurrence (O) in DFMEA considers:
- Design maturity (new design = higher O)
- Similar design history (similar designs with this failure = higher O)
- Prevention controls: design reviews, CAE / FEA, DVP testing
Detection (D) in DFMEA considers:
- Design verification tests (DVP)
- Engineering analysis (FEA, simulation)
- Design reviews with checklists
- Prototype testing
D = 10 means no design verification for this failure mode. This is common for new features — it drives the DVP.
Ratings justification: All S/O/D ratings must be justified using analysis, test data, or design history. A rating without documented justification will not withstand OEM audit. Where design history exists from similar components, reference it explicitly. Where data is absent, mark O and D as preliminary and flag the DVP entry that will confirm them.
Step 6 — Optimization
For H-AP items in DFMEA, actions typically fall into:
- Design change: change geometry, material, tolerance, or coating
- Add design verification: add DVP test entry to confirm the design meets the requirement
- Add prevention: design guideline, DFM/DFA rule, standard reference
- Improve detection: add inspection requirement to DVP or design review checklist
DFMEA → DVP linkage: Every detection control (D rating improvement) must have a corresponding entry in the Design Verification Plan (DVP). If you improve D because "we will test it," the test must exist in the DVP.
Action tracking: All actions must be tracked to closure with objective evidence — test results, simulation output, or updated analysis. Actions marked "complete" without verification evidence are not acceptable. Open H-AP items past their target date must be escalated to the design review owner or programme manager, with a revised date and documented reason for delay.
Step 7 — Results Documentation
DFMEA outputs that feed other APQP documents:
- Special Characteristics identified in DFMEA → transferred to Control Plan and PFMEA
- Detection controls → DVP entries
- Interface failure modes → PFMEA structure analysis inputs
- Material / geometry requirements confirmed → released drawing
DFMEA → PFMEA handoff
The DFMEA and PFMEA are linked:
| DFMEA | → | PFMEA |
|---|---|---|
| Design Failure Effects (end-user impact) | → | Severity ratings in PFMEA |
| Special Characteristics | → | SC flagging in PFMEA process steps |
| Interface failure modes | → | PFMEA failure modes for assembly steps |
| Design intent (function) | → | Process step function requirements |
Mandatory DFMEA review events (APQP / IATF 16949 §8.3)
| Trigger | Required action |
|---|---|
| New product development | Start DFMEA at APQP Phase 2 — before design freeze. DFMEA initiated after freeze has no corrective value. |
| Engineering change request (ECR) | Review and update the DFMEA for all functions, failure modes, and interfaces affected by the change — before the change is released. |
| Design milestone / design review | Present DFMEA status: open H-AP items, actions, and revised ratings. DFMEA must be current at each gate. |
| Field failure with confirmed design root cause | Update FC, ratings, and actions to match validated root cause from 8D/field investigation. Update DVP to include the failure mode. |
A DFMEA that is not updated through the programme lifecycle is a design quality assurance gap — not a living document.
Common mistakes
- Starting DFMEA after design is frozen — DFMEA has no value if no changes can be made
- Only analysing the component, not the interfaces — most design failures are interface failures
- Improving D without adding DVP tests — detection credit without actual testing
- DFMEA and PFMEA teams working in silos — they must share severity ratings and special characteristics
Output Format
At the start of each use, ask the user:
"How would you like to receive the output? A — Structured Markdown (formatted tables and sections, ready to copy) B — Plain tables (simplified structure for Excel or Word) C — Narrative report (flowing text for a formal document or email)
Default: A."
Adapt all output sections to the chosen format. If the platform or session context already defines a format preference, skip this question.
Reference files
Changelog
| Version | Date | Author | Change |
|---|---|---|---|
| 1.0 | 2026-06-01 | @RBraga01 | Initial release |
| 1.1 | 2026-06-03 | @RBraga01 | Added interface matrix integration and DFMEA-to-PFMEA handoff workflow |
04 同仓库更多 Skills
worktable-review-with-annotations
Create, inspect, reply to, update, or resolve situated Worktable annotations. Use when feedback belongs to a Doc section, block, text range, or HTML Doc, or when the user asks to address existing review feedback and coordinate a requested artifact edit.
worktable-find-and-synthesize-context
Find, assess, and synthesize context from Worktable Docs and Records. Use when the user asks what a workspace contains, wants workspace-backed research, needs current facts reconciled across artifacts, or requests a cited synthesis without changing workspace state.
worktable-create-or-update-docs
Create, edit, rename, or maintain narrative Worktable Docs. Use for plans, decisions, briefs, notes, research syntheses, and other durable prose when the user requests a new artifact or a safe update to an existing one.
worktable-create-or-manage-records
Organize repeated structured information as durable Worktable Records. Use for research datasets, inventories, directories, pipelines, trackers, and other collections whose items need identity, fields, filtering, links, validation, or individual updates.
worktable-create-or-manage-interactive-html
Create or improve durable visual and interactive artifacts in Worktable. Use for dashboards, trackers, calculators, mini apps, slide presentations, and other requests that benefit from a polished HTML Doc.
worktable-collaborate-threads
Read, answer, and hand off messages through durable Worktable threads with users or other authenticated participants. Use when the user asks to check addressed messages, reply to a participant, continue a thread, request another agent's help, wait briefly for a response, or watch for comments and messages sent to the agent.